0800 6124 965
Hardwood Gates - The Hinchleywood
Based on an average sized driveway gate of 10ft (3m 048mm) wide x 4ft (1m 220mm) high. Including oil finish and complete hinge set.
£2100
Installation charges* (if required - excludes gate cost)
Non automated:
-
Option 1: Hang on existing posts/ pillars: £620
-
Option 2: Fit posts and hang gates: £920
Automation**: (includes automation kit)
-
Option 1: Above Ground: £3800
-
Option 2: Below Ground: £5100
* Subject to site survey. Additional costs may apply, dependent on ground type (inc slopes etc).
**Prices based on power cable being supplied at post/ pillar.
£150 charge for site visit - reduced from order value.
Description | Made to Measure | Installation
Handcrafted in the UK from the finest, hand selected, Iroko timber. Constructed using traditional time served techniques such as mortise, tenon and dowel jointed. Deep 70mm x 70mm frames combined with thick, hand selected timber for durability and elegance.
Made to measure with sizes from 6ft to 20ft wide and 3ft to 7ft high.
